Reference · Tiles
TILEEVERY ENCLOSURESchematic
The schematic is a map of the acoustic connections. Use it to verify what each face of the cone drives and where sound leaves the enclosure.
- Shows
- How drivers, chambers, ports and horn paths connect acoustically.
- Healthy when
- The connections, volumes and outlets match the design you intend to simulate.
- If it is not
- Select the intended enclosure and check its type and editable values before tuning the response.
The tile#
In this bandpass example, one diaphragm face sees a sealed chamber while the other drives a chamber with a port to the room. The room hears that port. The diagram shows acoustic roles and connections, not a proposed cabinet’s panel positions.
Read and edit in place#
- 1
Select the enclosure
Choose an enclosure in the legend below the drawing. The tile shows one schematic at a time; the active drawing accepts edits when you have editing permission. - 2
Inspect a part
Select a driver, chamber or path to follow its connection. In a multiple-entry horn, selecting a driver also selects that driver for editing. - 3
Change a value
Click an editable dimension or value and enter the new one. The edit updates the same enclosure or input setting used by the side panel and response graphs. - 4
Check the environment
The drawing’s environment control exposes Radiation space and Listening distance. These are workspace settings, so they affect the other designs too.
Choose the right detail view#
| Need | Use |
|---|---|
| Understand the whole acoustic connection | Schematic, including chambers and outlets. |
| Change a horn’s spans, flares or entries | Horn Editor. |
| Fit a horn path into boards and a cabinet | Fold. |
| Set the rectangular baffle and driver position | Baffle Layout. |
What to try#
| Try | What it changes |
|---|---|
| Trace the sound path | Follow each diaphragm face to a chamber, horn or radiating outlet. |
| Edit a value in place | Click an editable value on the active drawing; it updates the same design as the enclosure panel. |
| Inspect a horn path | Use Horn Editor for segment detail and Fold for cabinet geometry. |
Ask your AI#
Ask your AI
Using 00 Simulator, inspect my selected enclosure and explain the acoustic path from each face of the driver to the radiating outputs. Put the Schematic tile on screen and identify which chamber or path each editable value belongs to.
Connect your assistant so it can open your designs.