Guides · Work in the app
On a phone
00 Simulator runs on a phone with the same solver and the same tiles. The screen shows one tile at a time, the dock at the bottom holds what you change most, and the side panels become drawers.
- 1Workspace menu
- 2The tile on screen
- 3A pill per tile
- 4Add or choose a graph
- 5Input power
- 6Layout
The phone layout#
Any window narrower than 768 pixels gets this layout: a phone, a small tablet held upright, or a narrow browser window on a computer. The header at the very top is the same as on a computer, with Undo, Redo, Share, Export, Settings and the rest as icons.
| Part | What it does |
|---|---|
| The cloud, top left | Back to workspaces, your saved designs. |
| The name in the middle | The workspace, or Local workspace as a guest. Tap it to rename a workspace of your own (Rename workspace). |
| The menu, top right | Open workspace menu: Enclosures, Driver, Power, EQ and Environment, each as a drawer. |
| The tile | One at a time, the full width of the screen. Swipe sideways for the next. |
| The dock | A pill per tile, + to add or choose one, the power chip and the layout button. |
Enclosures and the Driver panel#
- Enclosures slides in the enclosure list with the Enclosure panel below it, and Measured traces below that. Tap a row and it opens that enclosure and closes the drawer.
- Driver, Power, EQ and Environment open the Driver panel at that section, for the selected enclosure. The workspace describes each one.
- Tap the dimmed page beside a drawer to close it.
One tile at a time#
- Swipe sideways to page through the tiles, or tap a pill in the dock. The pill of the tile on screen shows its name.
- + (Add or choose a graph) lists every tile by group. Choosing one already on the dashboard pages to it. The list has no search box on a phone, so the keyboard stays out of the way.
- Tap a graph to hold the readout at that frequency. The legend then offers Note here, and on tiles that take EQ, EQ here to add a filter right there.
- To edit EQ on a graph, tap EQ in its header. With no filters yet it says Tap the response where you want a filter.
Help without leaving the tile#
Tap the ⓘ in a tile’s header to open its help sheet. It explains what the tile shows, what a healthy reading looks like and what to try. Where the tile has a live reading, the sheet names the design and the computed frequency range, and updates as the design changes.
- Full page opens the tile’s complete reference in a new tab, keeping the simulator in place.
- Ask AI prepares a prompt about this tile for your own assistant. You can copy it, or open it in Claude or ChatGPT.
- Search workspace and docs searches the docs and offers ways to go to a tile, explain one, or add an available tile when the layout is editable. You can also reach it from Info in the app header.
- Tap Close help, or the dimmed page above the sheet, to return to the tile.
The dock and its sheets#
| Tap | Sheet | What is in it |
|---|---|---|
| The power chip | Input power | The power as a number and on a slider whose marks you can tap. A multiple-entry horn shows a chip per driver first. |
| A filter on a graph | The EQ filter editor | A chip per filter, + (Add another filter), Done, and the chosen filter’s settings. A multiple-entry horn adds a row of driver chips. |
| The layout button | Layout | The current layout, or Custom layout, with Revert, Save or Save as… to keep what you changed; your layouts, pinned ones first, and Manage…; Tiles in this layout, each with a bin to remove it, and Add tile. |
- One sheet opens at a time: choosing a filter closes the power or layout sheet.
- A sheet sits over the dock and never changes the size of the graph above it, so EQ handles stay where your finger left them.
- Tap the grab handle at the top of a sheet, or swipe it down, to close it. The power sheet also closes when you tap outside it.
- The layout button shows a dot once you change the tiles of the layout you picked.
- While your assistant is editing the workspace, the dock shows what it is doing, with Take control in reach.
What needs a computer#
| On a computer | On a phone instead |
|---|---|
| Drag tiles to move and resize them, and Expand to 2 columns | Tiles fill the screen one at a time, in the layout’s order. Add and remove them from the Layout sheet. |
| Pinned layout tabs beside the layout switcher | Pinned layouts come first in the Layout sheet. |
| Side panels you drag to either side and resize | Drawers from Open workspace menu. |
| Search tiles... in the tile list | Scroll the list. |
| Pin to side, to keep a tile’s settings beside its chart | Settings open over the tile. |
| Right-click a graph for Add filter or Add note | Tap the graph, then EQ here or Note here. |
| Drop a measurement file on a tile | Add measured trace in the Enclosures drawer, or Export › Measured trace…. |
| The Appearance palette floats and drags | It opens as a sheet at the bottom. |
| Keyboard shortcuts | Taps and swipes. |
Ask your AI#
Ask your AI
Your assistant can arrange the tiles in the tab you have open, on a phone too, and mark what to look at.
Using 00 Simulator, put the Excursion and Port Velocity tiles of my open workspace on screen, and mark where each comes closest to its limit at the power I have set.
Connect your assistant so it can open your designs.